CODESYS‐V3 Soft PLC (WGX001 only)
PMX A4354-2.2 HBM: public 391
18.14 PMX package
PMX package 0.94 includes some new functions for the
PMX (see release notes). Proceed as follows when upda
ting the PMX package from version 0.6 to 0.94:
1. Install the new PMX package. Use the CODESYS
package manager to do this.
2. Update the (PMX) device. The PMX library, I/O map
ping and system events are updated here.
Notice
Package version 0.94 requires PMX firmware 3.0. If ne
cessary, run a firmware update. The current PMX firm
ware can be found on the system CD, or at hbm.com:
http://www.hbm.com/de/menu/
support/software-firmware-downloads/industrie-messver
staerker/
To Next Page
Loading...