Data acquisition software (DAQ) catmanEASY/AP
396 A4354-2.2 HBM: public PMX
devices in catman, the parameter "ALLOWPMXHYBRID"
in the registry file must first be set to the value 1.
This path for this file is: HKEY_CURRENT_USER\Soft
ware\VB and VBA Program\Settings\catmanEASY\SCAN
and it can be changed by calling "regedit".
Important
Important: While a catman measurement is running, no
signals may be added or removed in the PMX, as
otherwise the catman measurement will be aborted.
Tip
A fully-operational demo version of catman is available as
a free download at www.hbm.com
To Next Page