Model overview, scope of supply, accessories
40 A4354-2.2 HBM: public PMX
Notice
For firmware version 2.00 and later, catman
®
version 4.0
or higher is mandatory.
Tip
All commands of the PMX command set can be used as
lowlevel commands (see chapter 21) .
You can find extensive support and programming ex
amples in the program help for the individual drivers:
All drivers and the catman
®
software as well can be
downloaded from the HBM website as a free 30day ver
sion:
http://www.hbm.com/en/menu/support/software-
firmware-downloads/daq-software/catman/
To Next Page
Loading...