Before installation, commissioning or maintenance, the relevant manuals
must be read in their entirety.
All instructions concer
ning the installation and safety must be followed.
Failure to follow the instruction may result in personal injury and/or damage
to property.
HEINZMANN accepts no liability for damage caused by failure to follow
instructions.
Independent testing and
verification is of particular importance in all
applications where malfunction may result in personal injury or property
damage.
All examples and data, as well as all other information in this manual are
for instructional purposes only and must not b
application without independent testing and verification by the user.
HEINZMANN makes no warranty, express or implied, that the examples,
data or other information in this manual are error-
free, conform to industry
standards or meet the needs of any particular application.
Before installation, the following must be observed:
Always disconnect the system from the power supply before working on it!
Only use cable shielding and power supply connections that compl
the European Directive regarding EMC.
Check the function of all existing protection and monitoring systems.
As soon as an electrical drive system is supplied with voltage, it can start
moving at any time, depending on the circumstances. Any po
area must therefore be secured against unauthorized access.
HEINZMANN expressly disclaims any implied warranty of tradeability or
fitness for a particular purpose, even in the event that HEINZMANN's
attention has been drawn to a particular purpose or that a particular purpose
is referred to in the manual.
HEINZMANN disclaims all liability for direct, indirect, incidental or
consequential damages arising out of any use of the examples, data or other
information contained in this manual.
HEINZMANN accepts no responsibility for the design and planning of the
overall technical system. This is the responsibility of
planners and specialist engineers
. It is also their responsibility to check
whether the performance of the HEINZMANN equipment is adequate for
the intended purpose. The operator is also responsible for proper
commissioning of the overall system.
To Next Page
Loading...