7 Maintenance, repair and cleaning
CargoPower installation and operation, revision - 01 63
7.3 Cleaning
Danger due to unforeseen motor activity and rotating parts
The motor may start moving unexpectedly if the drive system is left on
during cleaning operations. Limbs or items of clothing may be drawn into
rotating parts. This can result in injuries.
˃ Remove the battery before cleaning the vehicle.
˃ Ensure that the contacts of the battery's plug-in connection are not
soiled with cleaning agent or similar.
˃ When putting the vehicle back into operation after assembly or
repair, position it so that the drive wheel can rotate freely. Only then
reinsert the battery and check the proper function of the drive.
The components of the drive system can be cleaned with a soft cloth and the usual cleaning
agents or soapy water, but not wet.
The use of a steam jet, high-pressure cleaner or a water jet for cleaning is
not permitted. The penetration of water into the control housing, the
motor or the electrical plug connections can destroy the units.
One exception to this is the alternator of Schaeffler AG is an
exception. This may be cleaned wet with a water jet.
To Next Page
Loading...