4 Peripherals
CargoPower installation and operation, revision - 01 17
4 Peripherals
Peripheral devices are all additional attachments that are compatible with the CargoPower drive
system but are not manufactured by HEINZMANN itself.
The CargoPower drive system can be operated in the following desired modes depending on
the application:
• eBike:
The drive system is located in a bicycle for electric assistance while riding, also referred
to as a pedelec or EPAC (Electrically power assisted cycle). The CargoPower drive
system has been designed in accordance with the standards DIN EN 15194:2018-11 and
DIN EN 79010:2020 and can comply with this standard.
• External Control:
The system receives a setpoint value for the torque from a higher-level system via CAN
bus and regulates to this.
Depending on the application, the system can consist of the following peripherals:
• Pedal sensor or FREE DRIVE alternator
• HMI Cargo Remote (human-machine interface)
• Display Cargo View
• Throttle grip or thumb throttle
• Buttons for additional functions (starting aid, reversing, etc.)
• Brake handles with electrical contacts
(cannot be obtained from HEINZMANN)
- Function: when braking, motor assistance stops
• Accumulator/battery
Only peripheral devices approved by HEINZMANN may be used.
To Next Page
Loading...