7 Maintenance, repair and cleaning
CargoPower installation and operation, revision - 01 62
7.2 Repairs and service
Repairs of the motor cannot generally be carried out by the user. In the event of blockages,
malfunctions or damage, HEINZMANN must be contacted.
Repairs to the drive system by the user are at the user's own risk and discretion!
When refitting the drive wheel, e. g. after a tyre change, all fastening
elements must be properly refitted.
˃ Refit wheel nuts with the prescribed tightening torque
˃ Insert torque supports designed as levers into the recesses provided
in the hub in a fitting, form-fitting and completely backlash-free
manner.
˃ Torque supports integrated in the stub axle must be completely free
of play.
Private users report a defect to the manufacturer or dealer of the vehicle or contact a service
partner:
https://www.heinzmann-electric-motors.com/kontakt/servicepartner
Vehicle manufacturers who use the CargoPower drive system use the following service and
complaint or complaints use the following service form:
https://www.heinzmann-electric-motors.com/kontakt/kundenservice
To Next Page
Loading...