HellermannTyton Autotool 2000 CPK - Deleting Measurement Results; Saving Measurement Results

Operating Instructions • AT2000 CPK • 07-2019 • v03 • 106-29004
HT Data Management
26
f Click on the measurement mode functions to trigger the
corresponding action on the AT2000 CPK.
f Perform one binding.
; The binding information is displayed
1 .
f Enter the calculated value into the field Measured force
3 .
f Click on Accept.
; A new line is added to the logfile.
f Repeat the measurement procedure several times.
f Click on Deactivate measurement mode
6 or switch
off the tool.
9.7.2 Deleting measurement results
f To delete a line, highlight it and click on Delete line.
9.7.3 Saving measurement results
f To save the measurement results in the table, click on
Export.
f Define the storage location for the exported *.CSV data.
The measurement results can also be converted into the file
formats *.xls or *.html and displayed, à"Export data" on
page22.