HellermannTyton Autotool 2000 CPK - Power Pack CPK; Noise and Vibration Information

Operating Instructions • AT2000 CPK • 07-2019 • v03 • 106-29004
Technical data
38
12.2 PowerpackCPK
110
258
933,3
Value
Line voltage 100 V – 230 V
Line frequency 50/60 Hz
Protection class I
Size L × W × H approx. 260 mm × 110 mm × 93 mm
Weight approx. 1300 g
Back-up battery CR 2032 3V or equivalent
12.3 Noise and vibration information
Emission sound pressure level
L
pA
Uncertainty K
pA
65 dB re20 μPa
3 dB
Sound power level L
WA
Uncertainty K
WA
76dB re1pW
3 dB
Aggregate figure for vibration a
h
Uncertainty K
0.8 m/s
2
1.5 m/s
2
The vibration level as stated here is a measured value
obtained by the standardised method set out in
EN 60745-1:2009; it can be used for the purposes of device
comparison.
The figure for vibration stated here is for the power tool
in conditions of its intended use and can differ from the
actual figure for the power tool in conditions of other
use or if not adequately serviced.
Accurately estimating vibration load over a certain work
period entails making due allowance for the times
during which the device is switched off or running, but
not actually in use. This can reduce vibration load over
the entire work period by a significant margin.
f Implement additional safety measures to protect the
operator from the effects of vibration, for example:
• Servicing of power tools and use tools
• Keeping hands warm
• Workflow organisation