Operating Instructions • AT2000 CPK • 07-2019 • v03 • 106-29004
3
Table of contents
1 Notes for the user ................... 5
1.1 Information about the product ....... 5
1.2 Warranty ........................ 5
1.3 Contact data ..................... 5
1.4 Information about these Operating
Instructions ...................... 5
1.5 Copyright and intellectual property
rights ........................... 5
1.5.1 Keeping and dissemination of the
Operating Instructions .............. 5
1.6 Target group of these Operating
Instructions ...................... 5
1.7 General information ............... 5
1.8 Conventions adopted in these
Operating Instructions .............. 6
1.8.1 Classification of the precautionary
notices ......................... 6
1.8.2 Other notational conventions ........ 6
2 Safety warnings .................... 6
2.1 General power tool safety warnings ... 6
2.1.1 Occupational health and safety ....... 6
2.1.2 Electrical safety ................... 6
2.1.3 Safety of persons .................. 7
2.1.4 Use and handling of the power tool ... 7
2.1.5 Service. . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Intended use ..................... 7
2.3 Misuse. . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Personnel qualification .............. 8
2.4.1 Specialist personnel for operation ..... 8
2.4.2 Specialist personnel for maintenance
and servicing ..................... 8
2.4.3 Qualified electrician ................ 8
2.4.4 Authorised specialist for repair and
testing .......................... 8
2.5 Underlying hazards associated with
use of the AT2000 CPK ............. 8
2.5.1 Cleanliness at the workplace ......... 8
2.5.2 Spare parts and accessories .......... 8
3 Design and function ................. 9
3.1 Overview of the device ............. 9
3.1.1 Scope of supply ................... 9
3.1.2 Serial number .................... 9
3.1.3 Checking scope of supply ........... 9
3.2 Functional description ............. 10
3.2.1 AT2000 CPK .................... 10
3.2.2 Power pack CPK ................. 10
4 Transport, disposal and storage ....... 11
4.1 Transporting the device ............ 11
4.2 Disposal ....................... 11
4.3 Storage ........................ 11
5 Installation ....................... 11
5.1 Installing the accessories ........... 11
5.2 Connecting the device ............. 11
6 Operation ........................ 11
6.1 Switching on .................... 11
6.2 Switching off .................... 11
6.3 Loading cable ties ................ 11
6.4 Positioning and binding items for
bundling ....................... 12
6.4.1 Emptying the waste box ........... 12
7 Settings in the display menu .......... 12
7.1 Accessing the settings ............. 13
7.2 Accessing the parameter set ........ 13
7.3 Setting the force level ............. 13
7.4 Setting the binding quality .......... 13
7.5 Setting the loop diameter .......... 14
7.6 Setting the cutting mode ........... 14
7.7 Setting tension-free cutting ......... 14
8 Settings in the main menu ........... 15
8.1 Languages menu ................. 15
8.2 Status menu .................... 15
8.3 Settings menu ................... 15
8.3.1 Interruption front sensor ........... 16
8.3.2 Date / time ..................... 16
8.3.3 Check of binding ................. 16
8.4 Contact menu ................... 16
9 HT Data Management ............... 17
9.1 First steps ...................... 17
9.2 Access levels .................... 17
9.2.1 Binding menu ................... 17
9.2.2 Service menu .................... 17
9.2.3 Memory menu. . . . . . . . . . . . . . . . . . . 17
9.2.4 Update menu ................... 17
9.2.5 Measurement environment menu .... 17
9.2.6 Parameter set menu. . . . . . . . . . . . . . . 17
Operating Instructions
Translation of the original operating instructions
To Next Page
Loading...
