EC declaration of conformity
AT2000 CPK AUTOMATIC TOOL SYSTEM
106-00000
Manufacturer: HellermannTyton GmbH
Address (street): Grosser Moorweg 45
Address (postcode/place): D-25436 Tornesch, Germany
Telephone: +49 4122/701-1
Telefax: +49 4122/701-400
We declare that the product introduced to the market by us
Name: AT2000 CPK automatic tool system
Product type: Binding tool
Machine type: Electrically powered binding tool
Serial number: _________________________________________________
is compliant in its design and construction with the basic safety and health
requirements of the EC directives set out below:
MachineryDirective 2006/42/EC
Low Voltage Directive 2014/35/EU
The harmonised standards listed below were applied for this
purpose:
EN60745-1:2000 + A11:2010
Tornesch, 25 January 2017
HellermannTyton GmbH
rep. rep.
Martin Burmeister Olaf Wulff
Safety engineer Head of development, application systems
This declaration corresponds to a manufacturer's declaration in the meaning of the
Machinery Directive 2006/42/EC, Annex II A. Changes, if made to the above-mentioned
product, void the validity of this declaration.