Need help?Do you have a question about the HGST Ultrastar Serv24-HA and is the answer not in the manual?
Provides a detailed description of the Ultrastar Serv24-HA, including its features.
Summarizes environmental, electrical, mechanical, and data capacity specifications.
Lists components that can be replaced along with their HGST part numbers.
Explains the status indicators (LEDs) for the chassis, PSU, and drives.
Describes the chassis as the primary housing for all system components.
Describes the redundant 1800W Power Supply Units (PSUs) and their specifications.
Describes the Compute Canisters housing key system components like CPUs and DIMMs.
Provides procedures for replacing a failed drive assembly in the enclosure.
Provides a step-by-step guide for replacing a DIMM in a Compute Canister.
Outlines the procedure for replacing a CPU and its associated heat sink module.
Outlines the procedure for replacing a Power Supply Unit (PSU) in the chassis.
Provides instructions for replacing a Compute Canister in the enclosure.
Introduces the Web UI for OOB management, control, and customization.
Provides steps for logging in as admin and creating new user accounts.
Explains how to update BIOS firmware using the Web UI interface.
Introduces IPMI and IPMItool for CLI-based management of the enclosure.
Introduces CFUFlash as a tool for flashing firmware updates via CLI.
Warns about ESD hazards and recommends using an ESD wrist strap.
Details power connection requirements, including outlet accessibility and grounding.
Covers general safety procedures for maintenance and servicing.
Lists operating systems that are fully supported by the Ultrastar Serv24-HA.
Lists supported CPUs, DIMMs, NVDIMMs, Drives, and Add-in Cards.
To Next Page
General