The status of the Compute Canister temperature sensors will be displayed.
Figure 246: Temperature Sensors
4. Check the temperature of the Compute Canister fans by issuing the command ipmitool –l lan –H <IP
ADDRESS>
–U
<USERNAME>
–P
<P
ASSWORD>
sdr
type
fan
.The temperature of the Compute Canister fans will be displayed.
Figure 247: Fan Temperature Sensors
4.4.1.4 Viewing System Logs and Reports using IPMItool
1. Launch a Terminal by clicking Applications > Accessories > Terminal.
The Terminal will appear.
2. View the system event logs by issuing the command ipmitool –l lan –H <IP ADDRESS> –U <USERNAME>
155
4 System Management
User Guide 4.4 IPMI Overview
To Next Page
Loading...
Need help?
General
