Appendix
A
A System Management Appendices
A.1 IPMItool Commands
Get the Command list by executing the command ipmitool -h.
Send a RAW IPMI request and print responseraw
Send an I2C Master Write-Read command and print responsei2c
Configure LAN Channelslan
Get chassis status and set power statechassis
Shortcut to chassis power commandspower
Send pre-defined events to MCevent
Management Controller status and global enablesmc
Print Sensor Data Repository entries and readingssdr
Print detailed sensor informationsensor
Print built-in FRU and scan SDR for FRU locatorsfru
Print System Event Log (SEL)sel
Configure Platform Event Filtering (PEF)pef
Configure and connect IPMIv2.0 Serial-over-LANsol
Configure and connect with Tyan IPMIv1.5 Serial-over-LANtsol
Configure IPMIv1.5 Serial-over-LANisol
Configure Management Controller usersuser
Configure Management Controller channelschannel
Print session informationsession
OEM Commands for Sun serverssunoem
OEM Commands for Kontron deviceskontronoem
Run a PICMG/ATCA extended cmdpicmg
Update IPMC using Kontron OEM Firmware Update Managerfwum
Run list of commands from fileexec
Set runtime variable for shell and execset
A.2 IPMItool LAN Key Options
Get the LAN Key Options list by executing the command ipmitool -h.
This help-h
Show version information-V
168
A System Management Appendices
User Guide A.1 IPMItool Commands
To Next Page
Loading...
Need help?
General
