Verbose (can use multiple times)-v
Display output in comma separated format-c
Interface to use-I intf
Remote host name for LAN interface-H
hostname
Remote RMCP port [default=623]-p port
Remote session username-U
username
Read remote session password from file-f file
Use local file for remote SDR cache-S sdr
Prompt for remote password-a
Set SOL escape character-e char
Cipher suite to be used by lanplus interface-C
ciphersuite
Use Kg key for IPMIv2 authentication-k key
Remote session privilege level [default=ADMINISTRATOR]-L level
Force use of auth type NONE, PASSWORD, MD2, MD5 or OEM-A authtype
Remote session password-P
password
Read password from IPMI_PASSWORD environment variable-E
Set local IPMB address-m address
Set destination channel for bridged request-b channel
Set destination lun for raw commands-l lun
Bridge request to remote target address-t address
Setup for OEM (use 'list' to see available OEM types)-o oemtype
Use file for OEM SEL event descriptions-O seloem
A.3 IPMItool User Commands
Get the User Commands list by executing the command ipmitool - lan -H <IP ADDRESS> -U <USERNAME>
[<channel number>]summary
[<channel number>]list
<user id> <username>set name
<user
id>
[<pass
word>]
setpassword
<user id>disable
<user id>enable
169
A System Management Appendices
User Guide A.3 IPMItool User Commands
To Next Page
Loading...
Need help?
General
