b) Carefully slide the Compute Canister into the slot with both latch handles in the open position until
the latch handles begin to engage.
Figure 177: Installing the Compute Canister
c) Rotate the latch handles into the enclosure until the are fully engaged.
Figure 178: Latching the Compute Canister
21. Verify that the Compute Canister appears with no issues.
a) Open a browser and browse to the BMC IP Address of the Compute Canister.
116
3 Part Replacement
User Guide 3.12 Compute Canister Replacement
To Next Page
Loading...
Need help?
General
