b) Log-in to Web UI using the default username admin and default password admin.
Figure 202: Admin Log-in
2. Navigate to Settings > User Management using the Navigation menu.
Figure 203: User Management
3. Select an unassigned user card.
The User Management Configuration Page will appear.
4. Configure the required User Settings.
• Username: create a Username
• Password: create a Password
• Enable User Access: select the checkbox
• Network Privilege: select a privilege level
• Serial Privilege: select a privilege level
130
4 System Management
User Guide 4.3 Web UI Overview
To Next Page
Loading...
Need help?
General
