CMDNetFnCommands
09hChassisGet System Boot Options
0AhChassisSet Front Panel Button Enables
0BhChassisSet Power Cycle Interval
0FhChassisGet POH Counter
Event Commands
00hS/ESet Event Receiver
01hS/EGet Event Receiver
02hS/EPlatform Event (a.k.a. “Event
Message”)
PEF and Alerting Commands
10hS/EGet PEF Capabilities
11hS/EArm PEF Postpone Timer
12hS/ESet PEF Configuration
Parameters
13hS/EGet PEF Configuration
Parameters
14hS/ESet Last Processed Event ID
15hS/EGet Last Processed Event ID
16hS/EAlert Immediate
17hS/EPET Acknowledge
Sensor Device Commands
24hS/ESet Sensor Hysteresis
25hS/EGet Sensor Hysteresis
26hS/ESet Sensor Threshold
27hS/EGet Sensor Threshold
28hS/ESet Sensor Event Enable
29hS/EGet Sensor Event Enable
2AhS/ERe-arm Sensor Events
2BhS/EGet Sensor Event Status
2DhS/EGet Sensor Reading
FRU Device Commands
10hStorageGet FRU Inventory Area Info
11hStorageRead FRU Data
172
A System Management Appendices
User Guide A.4 Standard IPMI Command Support List
To Next Page
Loading...
Need help?
General
