User Manual of PanoVu Series Network Camera
Auto-Switch: Switch the day and night mode according to the illumination automatically.
Scheduled-Switch: Switch to the day mode at 6:00 a.m., and switch to the night mode at
18:00 p.m.
(2) Select Area to configure in the dropdown list.
(3) Set the values of Sensitivity and Percentage.
Sensitivity: The greater the value is, the easier the alarm will be triggered.
Percentage: When the size proportion of the moving object exceeds the predefined value,
the alarm will be triggered. The less the value is, the easier the alarm will be triggered.
5. Set the Arming Schedule for Motion Detection.
(1) Click tab to enter the arming schedule setting interface.
Figure 6-3 Arming Schedule
(2) Select the timeline of a certain day, and drag the mouse to set the arming schedule (the
start time and end time of the arming task).
(3) After you set the scheduled task, you can click and copy the task to other days
(optional).
Figure 6-4 Arming Time Schedule
To Next Page
Loading...
Need help?
General
