HIKVISION DS-2SF8C442MXG-EL/26 - Page 34

Check to enable this funcon and alarms will not be triggered when congeson occurs in the
detecon area.
Sensivity
With higher sensivity, the device is more sensive to detect and recognize targets.
10.
Click Save.
What to do next
Set the arming schedule, linkage and alarm. See Set ITS Arming Schedule and ITS Linkage and
Alarm for details.
Set Manual Capture for Illegal Parking
Set the rules for manually selecng illegal parking vehicles and capturing evidence pictures.
Steps
1.
Go to VCA → Intell Trac Event → Advanced Conguraon → Manual Capture for Illegal
Parking .
2.
Set the manual capture parameters.
Manual License Plate
Recognion
When an illegal parking vehicle is manually selected on the live view image, the device zooms
in to recognize the license plate. If the License Plate Thumbnail in Advanced
sengs is
enabled, a picture of the license plate is uploaded with the alarm message.
Capture No Plate Vehicle
Check to enable this funcon. The device captures the evidence pictures even if the license
plate of a vehicle is not recognized.
Plate Matching
Rao
The device compares the captured pictures of a vehicle and saves the pictures that have a
higher matching rao than the set Plate Matching Rao. If the rao is set to 0, the device
does not compare the pictures.
Amount of Pictures
Set the amount of pictures the device captures when a vehicle is manually selected.
Descripon
Select the Picture Type for each picture and set the Capture Interval between the pictures.
You can select Picture Type as Custom aer you upload the custom picture in VCA → Intell
Trac Event → Advanced Conguraon → Picture .
3.
Click Save.
4.
Go to Live View and click
on the toolbar.
5.
Select an illegal parking vehicle on the live view image.
The device takes evidence pictures of the vehicle.
6.
Click the icon again to end manual capture.
TandemVu PTZ Camera User Manual
22