HIKVISION DS-2SF8C442MXG-EL/26 User Manual

Illegal lane change detecon takes eect in the selected lanes or areas.
5.
Set Sensivity.
With higher sensivity, the device is more sensive to detect and recognize targets.
6.
Click Save.
What to do next
Set the arming schedule, linkage and alarm. See
Set ITS Arming Schedule and ITS Linkage and
Alarm for details.
Set Vehicle on Non-motor Vehicle Lane Detecon
The device detects vehicles driving on non-motor vehicle lane and captures evidence pictures.
Before You Start
Set
detecon scenes and detecon areas. See Set Detecon Scene and Set Lane Area for details.
Steps
1.
Go to VCA → Intell Trac Event → Common Sengs → Speed Dome Rule Sengs .
2.
Select Enforcement.
3.
Click Vehicle on Non-motor Vehicle Lane and check Enable.
4.
Select Arm Lane.
Vehicle on non-motor vehicle lane takes
eect in the selected lane areas.
5.
Set the Amount of Pictures.
The device takes evidence pictures of the set amount when a vehicle hits the trigger line in the
detecon area.
6.
Set
Duraon.
When the vehicle stays in the detecon area longer than the duraon, an alarm is triggered.
7.
Click Save.
What to do next
Set the arming schedule, linkage and alarm. See
Set ITS Arming Schedule and ITS Linkage and
Alarm for details.
Advanced
Sengs for Enforcement
Go to VCA → Intell Trac Event → Advanced Conguraon → Advanced to set the parameters.
Alarm Uploading
License Plate Thumbnail
When the license plate is recognized during enforcement, a license plate image is uploaded.
Upload Trac Violaon Data
Check to upload the alarm data when an enforcement event is triggered.
TandemVu PTZ Camera User Manual
26

HIKVISION DS-2SF8C442MXG-EL/26 Specifications

General

Brand	HIKVISION
Model	DS-2SF8C442MXG-EL/26
Category	Security Camera
Language	English