Network Video Recorder User Manual
94
Steps
1. Go to Menu → Configuration → Network.
2. Set the IPv4 address, IPv4 subnet mask, IPv4 gateway and the preferred DNS server in the
Network Settings menu.
3. Click Apply to save the settings.
4. Select the Email tab to enter the Email Settings interface.
Figure 8-4 Email Settings
5. Configure the following email settings.
Enable Server Authentication
Check it to enable the server authentication feature.
User Name
The user name of sender’s account registered on the SMTP server.
Password
The password of sender’s account registered on the SMTP server.
SMTP Server
The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
SMTP Port
The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS
Click Enable SSL/TLS if required by the SMTP server.
Sender
The name of sender.
Sender's Address
The Email address of sender.
To Next Page
Loading...
Need help?
General
