Video Access Control Terminal User Manual
82
3. Select the access control point (door) from the list.
Note: Up to four doors can be added in one multi-door interlocking combination.
4. Click OK to save the adding.
5. (Optional) After adding the multi-door interlocking combination, you can select it from the list and click
Delete to delete the combination.
Click Apply Settings button to take effect of the new settings.
White List
You can add the mobile phone number to the access control device for access permissions. The mobile phone
can control the door and the zones by sending SMS control instructions.
Steps:
1. Click the White List tab to enter the white list interface.
2. Select the access control device from the list and click Add button.
3. Input the mobile number.
4. Select the access control permission. You can check the corresponding checkbox to enable the permission.
Door: The mobile can control the door (open, closed, remain open, or remain closed).
Zone: The mobile can arm and disarm the zone.
To Next Page
Loading...
