Video Access Control Terminal User Manual
83
5. Click Save button to save parameters.
6. You can select the added white list and click Delete button to delete it.
7. Click Apply Settings button to take effect of the new settings.
Notes:
Up to 8 white lists can be added for one access control device.
The mobile can control the door and the zones by sending SMS control instructions. The SMS control
instruction is composed of Command, Operation Range, and Operation Object.
010-Open, 011-Closed, 020-Remain open,
021-Remain Closed, 120-Disarm, 121-Arm
1-all objects with permission, 2-single
operation
Starts from 1 (corresponding to different
doors or arming regions according to
commands)
Command#2#Operation
Object#
Authentication Password.
Fingerprint: The door can open by only inputting the fingerprint.
Card: The door can open by only swiping the card.
Card or Fingerprint: The door can open by inputting the fingerprint or swiping the card.
Password and Fingerprint: The door can open by both inputting the card password and inputting the
fingerprint.
Note: Here the password refers to the password set when issuing the card. Refer to 4.2.1 Empty Card.
Card and Fingerprint: The door can open by both inputting the fingerprint and swiping the card.
Card, Password and Fingerprint: The door can open by both inputting the fingerprint, inputting the
card password, and swiping the card.
Note: Here the password refers to the password set when issuing the card. Refer to 4.2.1 Empty Card.
3. Click and drag your mouse on a day to draw a color bar on the schedule, which means in that period of time,
the card reader authentication is valid.
To Next Page
Loading...
