Video Access Control Terminal User Manual
84
4. Repeat the above step to set other time periods.
Or you can select a configured day and click Copy to Week button to copy the same settings to the whole
week.
You can click Delete button to delete the selected time period or click Clear button to delete all the
configured time periods.
5. (Optional) Click Copy to button to copy the settings to other card readers.
6. Click Save button to save parameters.
7. Click Apply Settings button to take effect of the new settings.
Multiple Authentication
You can manage the cards by group and set the authentication for multiple cards for one access control point
(door).
Note: Please set the card permission and apply the permission setting to the access controller first. For details,
refer to 4.6 Permission Configuration.
Steps:
1. Click Multiple Authentication tab and select an access control point (door) from the list on the left.
2. Click Add Authentication Group button to pop up the following interface:
To Next Page
Loading...
