Video Access Control Terminal User Manual
87
3. In the Remain Open Duration (min), input the time duration for remaining open the door.
Note: The Remain Open Duration should be between 0 and 1440 minutes. By default, it is 10 minutes.
4. In the First Card list, Click Add button to pop up the following dialog box.
1) Select the cards to add as first card for the door and click OK button.
Note: Please set the card permission and apply the permission setting to the access control device first.
For details, refer to 4.6 Permission Configuration.
2) You can click Delete button to remove the card from the first card list.
5. Click Save and then click Apply Settings button to take effect of the new settings.
Anti-Passing Back
Purpose:
You can set to only pass the access control point according to the specified path and only one person could pass
the access control point after swiping the card.
Notes:
Either the anti-passing back or multi-door interlocking function can be configured for an access control
device at the same time.
You should enable the anti-passing back function on the access control device first.
Setting the Path of Swiping Card (Card Reader Order)
Steps:
1. Click Anti-passing Back tab and select an access control point.
2. You can select the card reader as the beginning of the path.
3. In the list, click the text filed of Card Reader Afterward and select the linked card readers.
To Next Page
Loading...
