Fingerprint Access Control Terminal
27
Attendance Menu Figure 4. 49
4.6.1.1 Editing and Resetting Department
Steps:
1. Select a target department to edit.
Department List Interface Figure 4. 50
2. Press the OK key to enter the configuration interface.
Configuration Interface Figure 4. 51
3. Select Edit and press the OK key.
4. Edit the department name, the shift type and the shift name.
5. Press the ESC key and select Yes to save the settings and exit the interface.
Notes:
The department name supports numbers, uppercase letters, lowercase letters, Chinese
characters and symbols.
To Next Page
Loading...
