HIKVISION DS-K1T803MF - Page 44

Fingerprint Access Control Terminal
30
Normal Shift Configuration Interface Figure 4. 55
3. Edit the shift name, and the period in order.
Notes:
 The shift No. cannot be edited.
 The shift name supports numbers, uppercase letters, lowercase letters, Chinese characters
and symbols.
 The shift name supports up to 32 characters.
 Up to 4 time periods can be edited.
You can also select Reset to reset the settings.
4. Press the ESC key and select Yes to save the settings and exit the interface.
4.6.2.2 Man-hour Shift
Steps:
1. Press the key to enter the Man-Hour interface.
Man-hour Shift List Interface Figure 4. 56
2. Select a man-hour shift type in the list.
Notes:
 By default, the man-hour shift type includes 6H/Day (6 hours per day), 4H/Day (4 hours per
day), and 30 custom types.
 The following steps will take Custom 1 as an example.
3. Press the OK key to enter the Man-Hour Shift configuration interface.