Fingerprint Access Control Terminal
65
There are 3 settings in this interface: Week Plan, Holiday Plan, and Template.
Setting Week Plan
Adding Week Plan
System defines 2 kinds of week plan by default, Enable Week Plan by Default and Disable Week Plan by
Default. You can define custom plans on your demand.
Steps:
1. Click the Add Week Plan button to pop up the adding plan interface.
2. Input the name of week plan and click the OK button to add the week plan.
3. Select a week plan in the plan list on the left-side of the window to edit.
4. Click and drag your mouse on a day to draw a blue bar on the schedule, which means in that period of
time, the cofigured permission is activated.
5. Repeat the above step to configure other time periods.
Or you can select a configured day and click the Copy to Week button to copy the same settings to
the whole week.
Deleting Week Plan
Click to select a configured duration and click the Delete Duration button to delete it.
Click the Clear Duration button to clear all the configured durations, while the week plan still
exists.
Click the Delete Week Plan button to delete the week plan directly.
To Next Page
Loading...
