Fingerprint Access Control Terminal
69
Steps:
1. Enter the Door Status Management page.
2. Click and select a door from the door list on the left side of the page.
3. Draw a schedule map.
1) Select a door status brush / on the upper-left side of the
Door Status Settings panel.
Remain open: the door will keep open during the configured time period. The brush is marked
as yellow.
Remain Closed: the door will keep closed during the configured duration. The brush is marked
as blue.
2) Click and drag the mouse to draw a color bar on the schedule map to set the duration.
To Next Page
Loading...
