Fingerprint Access Control Terminal
75
By Person: you can select people from the list to enter/exit the door.
By Department: You can select departments from the list to enter/exit the door. Once the
permission is allocated, all the people in this department will have the permission to access the
door.
By Access Control Point: You can select doors from the door list for people to enter/exit.
By Door Group: You can select groups from the door list for people to enter/exit. The permission
will take effect on the door in this group.
4. Click Next to enter the Permission Settings interface.
5. Click on the dropdown menu to select a schedule template for the permission.
Note: The schedule template must be configured before any permission settings. Refer to Section 5.3.3
Schedule Template for detailed configuration guide.
6. Select people/department and corresponding doors/door groups from the appropriate lists.
To Next Page
Loading...
