HIKVISION DS-TCG406-E - Page 24

1.
Go to Conguraon → Capture → Capture Parameters → Vehicle Feature .
2.
Check the vehicle features to be recognized.
3.
Click Save.
Set Image Encoding Parameters
If the captured pictures are not clear, set the resoluon of the captured pictures and the picture
size.
Steps
1.
Go to Conguraon → Capture → Capture Parameters → Image Encoding and Composion .
Figure 3-7 Set Image Encoding Parameters
2.
Select Capture Resoluon.
3.
Enter JPEG Picture Size.
4.
Click Save.
Set Capture Overlay
If you want to overlay informaon on the captured pictures, set capture overlay.
Steps
1.
Go to
Conguraon → Capture → Capture Parameters → Text Overlay .
2.
Check Capture Picture Overlay.
Intelligent Entrance ANPR Camera User Manual
16