System Manual Compact Systems Appendix
HI 800 141 E Rev. 2.02 Page 105 of 110
Index of Tables
Table 1: HIMatrix System Variants 8
Table 2: Additional Relevant Documents 8
Table 3: Environmental Requirements 12
Table 4: Standards for EMC, Climatic and Environmental Requirements 12
Table 5: General Requirements 12
Table 6: Climatic Requirements 13
Table 7: Mechanical Tests 13
Table 8: Interference Immunity Tests 13
Table 9: Noise Emission Tests 14
Table 10: Verification of the DC Supply Characteristics 14
Table 11: Supply Voltage 17
Table 12: Operating Voltage Monitoring 18
Table 13: Temperature Monitoring 18
Table 14: Specifications 20
Table 15: Connection of Controllers and Remote I/Os with Different Operating Systems 23
Table 16: Equipment of Fieldbus Interfaces with Fieldbus Submodules 25
Table 17: Fieldbus Submodule 25
Table 18: Functions of the Processor Operating System 27
Table 19: Modes of Operation for the Processor System 29
Table 20: User Program Modes of Operation 30
Table 21: Parameters Configurable for Multitasking 32
Table 22: Reloading after Changes 38
Table 23: Effect of the Force Deactivation System Variable 42
Table 24: Force Switches and Parameters up to CPU OS V7 43
Table 25: Installation Type 44
Table 26: Construction Depths 50
Table 27: Power Supply Connectors 51
Table 28: System Parameters of the Resource - CPU OS V7 and Higher 54
Table 29: Effect of Target Cycle Time Mode 54
Table 30: System Parameters of the Remote I/O - CPU OS V7 and Higher 55
Table 31: Hardware System Variables - CPU OS V7 and Higher 56
Table 32: Hardware System Variables for Reading the Parameters 59
Table 33: System Parameters of the Rack 59
Table 34: System Parameters of the User Program - CPU OS V7 and Higher 61
Table 35: Parameters for Line Control 63
Table 36: Switch Variables for Line Control 63
Table 37: Module Slot with Pulsed Outputs 64
Table 38: Configuration of Pulsed Outputs 64
Table 39: Connection of the Global Variables to Output System Variables of the Input Module 65