1 Introduction System Manual Compact Systems
Page 8 of 110 HI 800 141 E Rev. 2.02
All these devices are identified in this document with F*03. The additional features of these
devices compared to standard devices are:
ï‚§ Enhanced performance
ï‚§ Sequence of events recording possible
ï‚§ Multitasking possible
ï‚§ Reload possible
ï‚§ Two IP addresses
This manual distinguishes between the following variants of the HIMatrix system:
Processor operating
system
Communication
operating system
Table 1: HIMatrix System Variants
The manual distinguishes among the different variants using:
ï‚§ Separated chapters
ï‚§ Tables differentiating among the versions, e.g., CPU OS V7 and higher, or CPU OS up to V7
Projects created with ELOP II Factory cannot be edited with SILworX, and vice versa!
Additionally, the following documents must be taken into account:
Safety functions of the HIMatrix system
SILworX Communication
Manual
Description of the communication protocols, ComUserTask
and their configuration in SILworX
HIMatrix PROFIBUS DP
Master/Slave Manual
Description of the PROFIBUS protocol and its configuration
in ELOP II Factory
HIMatrix Modbus
Master/Slave Manual
Description of the Modbus protocol and its configuration in
ELOP II Factory
Description of the TCP S/R protocol and its configuration in
ELOP II Factory
HIMatrix ComUserTask (CUT)
Manual
Description of the ComUserTask and its configuration in
ELOP II Factory
Instructions on how to use SILworX
ELOP II Factory Online Help
Instructions on how to use ELOP II Factory, Ethernet IP
protocol
ELOP II Factory First Steps
Introduction to ELOP II Factory
Table 2: Additional Relevant Documents
The latest manuals can be downloaded from the HIMA website at www.hima.com. The revision
index on the footer can be used to compare the current version of existing manuals with the
Internet edition.