HIMA HIMatrix Series User Manual

System Manual Compact Systems 7 Start-Up
HI 800 141 E Rev. 2.02 Page 69 of 110
The user management scheme allocates the rights to the user groups. The user groups allocate
the rights to the user accounts assigned to them.
Characteristics of user groups:
 The name must be unique within the project and must contain 1...31 characters.
 A user group is assigned an authorization type.
 A user group may be assigned an arbitrary number of user accounts.
 A project may contain up to 100 user groups.
User account properties
 The name must be unique within the project and must contain 1...31 characters.
 A user account is assigned a user group.
 A project may contain up to 1000 user accounts.
 A user account can be the project default user
7.4.2 User Management for the Controller
The user management for a controller (PES user management) is used to protect the HIMatrix
controller against unauthorized access and actions. The user and its access rights are part of
the project; they are defined with SILworX and loaded into the processor module.
The user management can be used to set and manage the access rights to a controller for up to
ten users. The access rights are stored in the controller and remain valid after switching off the
operating voltage.
Each user account is composed of name, password and access right. The user data can be
used to log in once a download has been performed to load the project into the controller. The
user accounts of a controller can also be used for the corresponding remote I/Os.
Users log in to a controller using their user name and password.
Creating user accounts is not required, but is a contribution to a safe operation. If a user
management scheme is defined for a resource, it must contain at least one user with
administrator rights.
Default User
The factory user settings apply if no user accounts were set up for a resource. The factory
settings also apply after starting a controller with the reset pushbutton activated.
Factory settings
Number of users:
1
User ID:
Administrator
Password:
None
Access right:
Administrator
i
Note that the default settings cannot be maintained if new user accounts are defined.

HIMA HIMatrix Series Specifications

General

Brand	HIMA
Model	HIMatrix Series
Category	Controller
Language	English