HIMA HIMatrix Series User Manual

HI 800 141 E Rev. 2.02 (1336)
All HIMA products mentioned in this manual are protected by the HIMA trade-mark. Unless noted otherwise,
this also applies to other manufacturers and their respective products referred to herein.
All of the instructions and technical specifications in this manual have been written with great care and
effective quality assurance measures have been implemented to ensure their validity. For questions, please
contact HIMA directly. HIMA appreciates any suggestion on which information should be included in the
manual.
Equipment subject to change without notice. HIMA also reserves the right to modify the written material
without prior notice.
For further information, refer to the HIMA DVD and our website http://www.hima.de and
http://www.hima.com.
© Copyright 2013, HIMA Paul Hildebrandt GmbH + Co KG
All rights reserved
Contact
HIMA contact details:
HIMA Paul Hildebrandt GmbH + Co KG
P.O. Box 1261
68777 Brühl, Germany
Phone: +49 6202 709-0
Fax: +49 6202 709-107
E-mail: info@hima.com
Revision
index
Revisions
Type of change
technical
editorial
1.00
The SILworX programming tool is taken into account
The document layout has been modified.
X
X
2.00
HIMatrix devices F*03, SILworX V4, HIMatrix CPU OS V8, COM
OS V13 are taken into account
X
X
2.01
SILworX V5, adaptations from the engineering manual - to replace
the engineering manual, parameters for remote I/Os, licensing are
handled
X
X
2.02
Added: Notes on redundant safeethernet, VLAN, CAN
X

HIMA HIMatrix Series Specifications

General

Brand	HIMA
Model	HIMatrix Series
Category	Controller
Language	English