Hioki 3802-50 - Page 116

32
2.11 Temperature Measurement
1. Set the function switch.
2. Use the SHIFT key to select the tem
-
perature display.
: Uses reference contact temperature
compensation according to the instru
-
ment's internal temperature sensor
: No reference contact temperatur
e
compensation (0°C reference)
3. Connect the temperature probe
to
the test terminals.
4. Connect the temperature probe
to
the object being tested.
5. Read the value displayed in th
e
main display.
K
K
0°C
SHIFT
<Example>
<
Example> K is selected
TEMP
-
+
K
0°C
K