14
1.3 Names and Functions of Parts
This instrument includes the holster as standard equipment.
Because the holster is made of a soft material, it will absorb external
shocks and protect the instrument.
Remove the instrument from the holster before attempting to change the
battery or the fuse. After replacing the battery or fuse, be sure to return the
instrument to the holster before starting to use the instrument again.
Test Lead
Holder
Connector
Strap Attachment
Hole
Holster
Stand
Strap
Attachment
Hole
Pass the strap provided through the hole in the holster to
secure the 3802-50 for portable use. The strap can be
used to suspend the instrument from a belt or hook when
there is no place to set it down.
Connector
This connector is for the optional communications cable. If
you remove instrument from the holster, this connector will
also be detached. Be careful not to lose the connector.
Test Lead
Holder
These lock the test leads in place. You can lock one test
lead in place and then carry the instrument around while
taking measurements.
Stand
Pull out the stand in order to set the instrument down in a
standing position.
Do not apply heavy downward pressure with the stand
extended. The stand could be damaged.
To Next Page
Loading...
