Hirschmann BAT54-F Series User Manual

Wireless LAN – WLAN
108
3.7 IEEE 802.11i for point-to-point connections
BAT54-Rail/F..
Release 7.54 06/08
D Enter the passphrase to be used.
Note: The passphrases should consist of a random string at least 22 charac-
ters long, corresponding to a cryptographic strength of 128 bits.
When set as P2P Master, the passphrase entered here will be used to check
the Slave's authorization to access. When set as P2P Slave, the access point
transfers this information to register with the remote site.
Configuration with LANconfig
For configuration with LANconfig you will find the encryption settings under
the configuration area 'Wireless LAN' on the '802.11i/WEP' tab.
Configuration with WEBconfig or Telnet
The encryption settings for the individual logical WLAN networks can be
found under WEBconfig or Telnet under the following paths:
3.7.5 LEPS for P2P connections
A further gain in security can be attained by additionally using BAT Enhanced
Passphrase Security (LEPS) which involves the matching of MAC address
and passphrase.
Configuration tool Menu/Table
WEBconfig Expert configuration
 Setup  Interfaces  WLAN-Inter-
faces
 Encryption-Settings
Termi nal/ Telnet
/Setup/Interfaces/WLAN-Interfaces/Encryption-Settings

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English