Hirschmann BAT54-F Series User Manual

Appendix
BAT54-Rail/F..
Release 7.54 06/08
13.1 Error messages in LANmonitor
519
13 Appendix
13.1Error messages in
LANmonitor
It is possible to read out VPN error messages over the LANmonitor.
13.1.1 General error messages
13.1.2 VPN error messages
Note: For correct evaluation of error messages for VPN connections, at least
LCOS version 3.22 must be installed on both BAT devices.
Connection attempt cancelled
Connection establishment failed (D-channel layer 1) Bus activation failed
Connection establishment failed (D-channel layer 2) no UA on SABME
Connection establishment failed (Layer 1) a/b ports
Connection establishment failed (Layer 2) a/b ports
ISDN line error (Layer 1) Cable not connected
Connection aborted (layer 2) X.75 / V.110
Local error Required resource not available -> ISDN prob-
lem; boot telecommunications system
PP login at remote site - PAP rejected Remote device can only handle PAP, but CHAP
is required
PPP login from remote site - timeout (PPP-PAP RX) Remote did not send PAP request
PPP login at remote site - timeout (PPP-PAP TX) Remote did not respond to PAP request
PPP login from remote site - CHAP rejected a CHAP reject was received after a CHAP chal-
lenge
PPP login from remote site - timeout (PPP-CHAP RX) Remote did not send CHAP response
PPP login at remote site - timeout (PPP-CHAP TX) Remote did not respond to CHAP response
Time limit exceeded exactly like fee limit... .
Connection establishment failed (Layer 1) no HDLC flags found
Connection establishment failed (Layer 2) X.75 / V.110 not working
DSL line error (Layer 1) Cable not connected

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English