Hirschmann BAT54-F Series User Manual

Wireless LAN – WLAN
BAT54-Rail/F..
Release 7.54 06/08
3.4 Configuration of WLAN parameters
55
Configuration with WEBconfig or Telnet
Under WEBconfig or Telnet you will find the Access Control List under the fol-
lowing paths:
U Protocol filter
With the protocol filter you can influence the handling of certain protocols dur-
ing transfer from the WLAN to the LAN.
Note: Packets from the WLAN for certain protocols/ports can be redirected
to special IP addresses in the LAN by the protocol filter. This function
known as "Redirect“ is described in detail in the section ’Redirect function’
→ page 82.
Configuration with LANconfig
For configuration with LANconfig you will find the protocol filter under the con-
figuration area 'WLAN Security' on the 'Protocols' tab.
Configuration tool Menu/Table
WEBconfig Expert configuration
 Setup  WLAN  Access list
Terminal/Telnet
cd /Setup/WLAN/Access-List

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English