Hirschmann BAT54-F Series User Manual

Routing and WAN connections
BAT54-Rail/F..
Release 7.54 06/08
11.17 The rapid spanning tree protocol
461
11.17.4Status reports via the Spanning Tree
Protocol
The current STP values can be viewed via Telnet in the LAN Bridge Status.
U General status information
D Bridge ID
This is the ID for the device that is being used by the Spanning Tree algo-
rithm. It is composed of the user-defined priority (upper 16 bits) and the
device MAC address (lower 48 bits).
D Root Bridge
The ID for the device that is currently elected root bridge.
D Root Port
The port that can be used to reach the root bridge from this device. If the
device itself is the root bridge, it is displayed with the special value '255'.
D Root Path Cost
The path costs of all hops added together in order to reach the root bridge
from this device.
D Protocol version
The protocol version currently set for determining network topology.
D Path Cost Computation
The protocol version currently set for computing path cost.
D Bridge Priority
Current setting for bridge priority.
U Information in the port table
The port table can be used to inspect the following values for all available
ports (LAN, wireless LAN, point-to-point connections).
D Priority
The priority of this port taken from the port configuration
D State
The current status of the port:
Configuration tool Call
WEBconfig, Telnet Expert Configuration > Status > LAN Bridge > Spanning Tree

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English