Routing and WAN connections
412
11.7
Changes in other services
BAT54-Rail/F..
Release
7.54
06/08
11.7.10IPX router
The IPX router can only handle a LAN, and so this has to be assigned explic-
itly by entering the interface and the VLAN-ID.
D Network
Netware network number of the local network.
D Default: 00000000
The setting '00000000' means that the network number is determined
automatically as long as a Novell server exists in the network.
D Binding
The Ethernet packet format for the local network.
D Automatic: Sets the packet format automatically if possible.
D II
D 802.3
D 802.2
D SNAP
D Interface assignment
Logical interface that this network is assigned to.
D Values: LAN-1 to LAN-n, WLAN-1-1 to WLAN-2-8, P2P-1-1 to P2P-2-
6, BRG-1 to BRG-8, any (depending on the availability of logical inter-
faces in the respective model). A logical interface which is assigned to
a network in this way is referred to as a "bonded" interface.
D Any: The network is valid for all logical interfaces.
Configuration tool Call
LANconfig IPX/SPX router
General
WEBconfig, Telnet Expert Configuration > Setup > IPX Router > LAN
To Next Page
Loading...
