Firewall
276
8.3
The BAT Firewall
BAT54-Rail/F..
Release
7.54
06/08
Sending the email from the BAT to the administrator only works if the right
email address is entered. Under LANconfig you can enter the email address
in the configuration area 'Firewall/QoS' under the tab 'General' .
Under WEBconfig or Telnet you can find the administrator email address as
follows:
To send an email an the required settings must be entered under LANconfig
in the configuration area 'Log & Trace' under the tab 'SMTP Account'.
Configuration tool Call
WEBconfig Expert Configuration
 Setup  IP Router  Firewall
Terminal/Telnet
/Setup/IP-Router/Firewall