Hirschmann BAT54-F Series - Page 278

Firewall
278
8.3 The BAT Firewall
BAT54-Rail/F..
Release 7.54 06/08
SNMP: Specific trap = 26 (0x1A)
SNMP: Time stamp = 1442 (0x5A2)
System descriptor
SNMP: OID = 1.3.6.1.2.1.1.1.0 1.
SNMP: String Value = BAT54-Rail 2.80.0001 / 23.09.2002 8699.000.036
Device string
SNMP: OID = 1.3.6.1.2.1.1.5.0 2. System-Name
SNMP: String Value = BAT54-Rail
Time stamp
SNMP: OID = 1.3.6.1.4.1.2356.400.1.6021.1.10.26.1.2.1 3.
SNMP: String Value = 9/23/2002 17:56:57
Source address
SNMP: OID = 1.3.6.1.4.1.2356.400.1.6021.1.10.26.1.3.1 3.
SNMP: IP Address = 10.0.0.37
Destination address
SNMP: OID = 1.3.6.1.4.1.2356.400.1.6021.1.10.26.1.4.1 4.
SNMP: IP Address = 192.168.200.10
Protocol (6 = TCP)
SNMP: OID = 1.3.6.1.4.1.2356.400.1.6021.1.10.26.1.5.1 5.
SNMP: Integer Value = 6 (0x6) TCP
Source port
SNMP: OID = 1.3.6.1.4.1.2356.400.1.6021.1.10.26.1.6.1 6.
SNMP: Integer Value = 4353 (0x1101)
Destination port (80 = HTTP)
SNMP: OID = 1.3.6.1.4.1.2356.400.1.6021.1.10.26.1.7.1 7.
SNMP: Integer Value = 80 (0x50)
Name of the filter rule
SNMP: OID = 1.3.6.1.4.1.2356.400.1.6021.1.10.26.1.8.1 8.
SNMP: String Value = BLOCKHTTP
Note: This trap and all different in the BAT generated traps are sent to all
manually configured trap receivers, just like to each registered
LANmonitor, which can evaluate this and possibly all other traps.