More services
494
12.7
Scheduled Events
BAT54-Rail/F..
Release
7.54
06/08
D Minutes
D Hours
D Week days
D Month days
D Months
The values 'minutes' to 'months' define the times when a command is to
be executed. With no value entered, it is not included in the controlling.
For each parameter, a comma-separated list of values can be entered, or
alternatively a range of minimum and maximum values.
The syntax of the 'Week day' field corresponds with the usual CRON inter-
pretation:
D 0: Sunday
D 1: Monday
D 2: Tuesday
D 3: Wednesday
D 4: Thursday
D 5: Friday
D 6: Saturday
D Command
The command to be executed or a comma-separated list of commands.
Any BAT command-line function can be executed.
D Owner
An administrator defined in the device can be designated as owner of the
CRON job. If an owner is defined, then the CRON job commands will be
executed with the rights of the owner.
D Default: root
D Variation
This parameter specifies the maximum delay in minutes for the start of the
CRON job after the set start time. The actual delay time is determined ran-
domly and lies between 0 and the time entered here.
D Default: 0
D Values: 0 to 65535 seconds.
D Particular values: With the variation set to zero the CRON job will be
executed at the set time.
To Next Page
Loading...
Need help?
General
