Hirschmann BAT54-F Series User Manual

More services
508
12.9 RADIUS
BAT54-Rail/F..
Release 7.54 06/08
D Server IP address
Specify here the IP address of your RADIUS server from which users are
managed centrally.
D Server port [default: 1.812]
Specify here the port used for communication to your RADIUS server.
D Key (shared secret)
Specify here the key to be used for coding data. The key must also be
configured on the RADIUS server.
D Backup server IP address [default: 1.812]
Specify here the IP address of your backup RADIUS server from which
users are managed centrally.
D Backup server port
Specify here the port used for communication to your backup RADIUS
server.
D Backup key
Specify here the key to be used for coding data. The key must also be
configured on the backup RADIUS server.
Note: The generic values for retry and timeout must also be configured (see
’Configuration of RADIUS as authenticator or NAS’ → page 502).
U Dial-in using 802.1x and RADIUS
WLAN clients can use the 802.1x protocol for network registration. The BAT
access point can use this protocol to forward the registration to the RADIUS
server. The MAC address is used for user identification.
Note: Please refer to ’EAP and 802.1x’ → page 37 for further information on
the 802.1 x protocol.
Configuration tool Call
LANconfig WLAN Security
 IEEE 802.1X  RADIUS server
WEBconfig, Telnet Expert configuration -->Setup -->IEEE802.1x > Radius server

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English