Hirschmann BAT54-F Series User Manual

Wireless LAN – WLAN
BAT54-Rail/F..
Release 7.54 06/08
3.6 Client mode
97
V Enable the WLAN network and enter the SSID of the network the client
station should log onto.
Under WEBconfig or Telnet the network settings for the logical WLAN
interfaces can be found under the following paths:
U Encryption settings
For access to a WLAN, the appropriate encryption methods and key must be
set in the client station.
V To enter the key, change to the '802.11i/WEP' tab under LANconfig in the
'Wireless LAN' configuration area. From 'WPA / private WEP settings', se-
lect the first WLAN interface from the list of logical WLAN settings.
Configuration tool Menu/Table
WEBconfig Expert configuration
 Setup  Interfaces  WLAN  Network
Terminal/Telnet
Setup/Interfaces/WLAN/
Network settings

Hirschmann BAT54-F Series Specifications

General

Brand	Hirschmann
Model	BAT54-F Series
Category	Wireless Access Point
Language	English