Hirschmann DRAGON MACH4000 series - Out-Of-Band Management Port

24
Installation DRAGON MACH4000
Release 01 07/2018
1.5.4 Out-of-band management port
Figure 8: Out-of-Band management port: RJ45 port; location on the device (front
side of the device)
This port is an RJ45 socket.
The port allows you to connect network components according to the
IEEE 802.3 100BASE-TX standard.
This port supports:
 100 Mbit/s half duplex,
 100 Mbit/s full duplex
The port allows you to manage the device and upload configurations via the
following protocols:
 SNMP
 SSH
 Telnet
 FTP
 SCP
 HTTP/HTTPS
For more information see the “Command Line Interface” reference manual.
You can download the manual on the Internet at the Hirschmann product
pages www.hirschmann.com.