Hirschmann DRAGON MACH4000 series - Removing an SFP Transceiver (Optional)

58
Installation DRAGON MACH4000
Release 01 07/2018
Figure 32: Removing a media module: Disassembly (front side of the device)
6.4 Removing an SFP transceiver (optional)
Figure 33: Removing an SFP transceiver: Removal sequence
Proceed as follows:
 Open the locking mechanism of the SFP transceiver (1).
 Pull the SFP transceiver out of the slot via the open locking
mechanism (2).
 Close the SFP transceiver with the protection cap (3).
312